to set the scanner system power up/down timer…
1.Press the Quit button 
and select Exit to exit your scanner system software.
2.Press the System Setup button.
3.Press the WIDEsystem button.
4.Select the Timer tab.
5.To activate the automatic power on, in the On column select the check box for the day.
6.To modify the time, select the hours digits and press the up or down buttons and then select the minutes digits and repeat the process.
7.Select AM or PM, and press the up or down buttons.
8.To activate the automatic power off, in the Off column select the check box for the day and then set the off time as described in steps 6 and 7 above.
9.Press the Apply button to confirm your changes and continue or press the OK button to confirm changes and exit WIDEsystem.
See tell me about WIDEsystem on page 71.
how do I define scanner setup options?
to access the scanner setup options…
1. Press the Setup tab.
hp designjet 815mfp & scanner 4200 | 39 |