how do I make copies?

quick copying

If you are copying a freshly printed plot, make sure that it has dried completely before placing the document in the scanner insertion slot. If it is not dry, you could damage your plot and dirty the glass plate on your scanner.

Remember to set your printer media width in your copy system software. See how do I set the printer media width? on page 3.

to make copies…

1.Place the document face down with the intended top edge forward in the scanner insertion slot. You can load your original into the scanner from the scanner’s center or right- hand side (whichever is set in Setup > Scan Options > Load).

2.Slide the document gently into the insertion slot until you feel it pulled into the start position.

3.In the Copy tab, select Color or B&W (black and white) copying—this determines the Type of original.

4.Select your Type of original template.

5.Set the Input size.

Usually this will be equal to the size of your original. You can let the scanner detect the document’s size.

6.Set the intended Output size of your copy.

For making one-to-one copies, this will be the size of your original.

You can also use Scale to determine the copy’s size.

7.Press the Copy button.

2

hp designjet 815mfp & scanner 4200