to change the insertion slot height…
1.Open the insertion slot cover.
2.Press down on the platen as you pull first one slider and then the other (left and right) towards the scanner’s center until the media thickness adjustment sliders found at each side are the same setting.
3. Close the cover.
To return the insertion slot height to its Normal position:
1.Press down on the platen as you push first one slider and then the other (left and right) towards the sides of the scanner.
2.When the platen is returned to its Normal position, the message Paper Guide in Extended Position will be replaced by the Load option: Center or Side.
how do I select a media profile?
1.Select the Setup tab.
2.Select the Media profile button.
hp designjet 815mfp & scanner 4200 | 9 |