Barco 26-0702000-00 Reference Video and Timing, Menu Orientation, FSN Series • User’s Guide • Rev

Ref

Output

Burst

Ref

Output

Timing

Ref

Info

5. Menu Orientation

System Menu

•Press {Ref Output} to change the reference video signal that is currently available on the REF OUT connector. Two options are available:

~Tri-level— selects a tri-level signal as the reference output.

~Burst — selects a black burst signal as the reference output.

As shown in the following table, note that the {Ref Output} button is grayed out when certain output formats are selected, and a default signal is automatically provided on the REF OUT connector.

Table 5-4.Reference output format exceptions

Output Format		Format Automatically Selected on REF OUT
NTSC (480i)		Black Burst
PAL (576i)		Black Burst
1080p	@ 23.98	Tri-level
1080p	@ 24	Tri-level

•Press {Ref Output Timing} to set the H and V offsets of the selected reference output. Two value buttons appear:

~Press {Ref H Offset} or use the adjacent Knob to set the desired amount of horizontal offset (in pixels).

~Press {Ref V Offset} or use the adjacent Knob to set the desired amount of vertical offset (in lines).

•Press the {Ref Info} button to display a pop-up with important information regarding the ability to change the reference output offsets.

Note	Reference Video and Timing
		Close

Please note the following important information:

If the reference input is set to External, H and V offsets adjust the video reference output relative to the video reference input. H and V can be positive or negative values.

If the reference input is set to Free Run, H and V offsets adjust the video reference output relative to the switcher’s internal Black signal.

Figure 5-78.Reference Output Information Pop-up

FSN Series • User’s Guide • Rev 01 199