AUTO TRAN.

3. Control Panel Orientation

Control Panel Descriptions

CUT

AUTO

TRAN

keyframe 2 to 1. Single keyframe DVE effects can only be mixed or wiped up or down — they cannot be triggered.

Important

The following criteria must be met in order to enable the FX

 

TRIG button:

 

One or two DVE cards must be installed.

 

A DVE channel must be assigned to the keyer that

 

you wish to use.

 

The DVE mode in the Key Menu must be “on.”

 

KEY 1 and/or KEY 2 must be enabled.

 

A two-keyframe effect must be loaded in the selected

 

DVE channel.

 

If any of these criteria are not met, the button will not light.

 

 

Because DVE channels are assigned to keyers, there are three ways that you can work with two-keyframe DVE effects:

Mix or wipe only

Mix or wipe the DVE effect up or down (just like a normal key)

— without an effects trigger.

SPress KEY 1, press MIX (or WIPE), press AUTO TRAN.

Mix or wipe plus trigger

Mix or wipe the DVE effect up or down — and simultaneously trigger the effect.

SPress KEY 1, press MIX (or WIPE) + FX TRIG, press

AUTO TRAN.

Trigger effect only

Trigger the DVE effect only, without a mix or wipe transition.

SPress KEY 1, press FX TRIG, press AUTO TRAN.

In Chapter 8, refer to the “Automatic DVE Triggering” section on page 396 for complete details.

5)Cut

Press CUT to instantly cut to the layers that are enabled in the Next Transition Section. For example:

S BG enabled — press CUT to cut from BG to PST. S KEY 1 enabled — press CUT to cut Key 1 on or off.

SBG + KEY 2 enabled — press CUT to cut from BG to PST, and simultaneously cut Key 2 on or off.

6)Auto Transition

Press AUTO TRAN to trigger an automatic transition, an effects trigger, or a combination trigger plus transition — to or from the layers enabled in the Next Transition Group. The transition uses the “type” of transition enabled in the Effects Group, and the M/E’s current transition rate and curve.

For example:

SBG + MIX enabled — press AUTO TRAN to mix from BG to PST.

SBG + WIPE enabled — press AUTO TRAN to wipe from BG to PST.

88

 

FSN Series • User’s Guide • Rev 01

 

Page 88
Image 88
Barco 26-0702000-00 manual Control Panel Orientation, 5Cut, 6Auto Transition, FSN Series • User’s Guide • Rev