Barco 26-0702000-00 fåéìí=mêçÅÉëëáåÖ=pÉÅíáçå, Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

Note

Note

Important

This function is available for analog inputs only, with the exception of NTSC and PAL. The button does not appear when SDI, DVI, NTSC or PAL inputs are selected on the UIC.

V Total is a fixed value which cannot be adjusted.

Any time that input timing adjustments are made, the mask settings for the selected input will automatically be reset to their default values — without any notification on screen.

Sharp-

ness

Flicker

Filter

Pulldown

Comp

Off

De-

Interlace

Adaptve

fåéìí=mêçÅÉëëáåÖ=pÉÅíáçå

The figure below illustrates the Input Processing Section for universal inputs:

Processing
	Sharp-	Flicker	Pulldown	De-	Motion
			Comp	Interlace	Thres-
	ness	Filter
					hold
			Off	Adaptve

Figure 5-93.Input Processing Section, Universal Inputs

The following adjustments are provided:

•Press {Sharpness} to display the Sharpness value button. Use the button (or knob) to set the input’s sharpness.

Range: -16 (very smooth) to 15 (very sharp)

Default: 0

•Press {Flicker Filter} to display the Flicker Filter value button. Use the button (or knob) to adjust the filter for interlaced inputs.

•Press {Pulldown Comp} to toggle the Pulldown Compensation mode on or off.

~Select On to apply pulldown compensation, in order to process video derived from film material.

~Select Off to disable the mode. This is the default mode.

Note	This function applies only for standard video (component, s-
	video, composite) inputs.

•Press {De-Interlace}to display the De-InterlacePop-up. If the input is interlaced, this function enables you to set how the system processes the input. The following options are available:

~Select Motion Adaptive to use motion adaptive de-interlacing. In this mode, the {Motion Threshold} button appears. See below for details.

218 FSN Series • User’s Guide • Rev 01