Barco 26-0702000-00 manual display the Transition Menu, Control Panel Orientation

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 87
Image 87
display the Transition Menu.

MIX

WIPE

FX

TRIG

3. Control Panel Orientation

Control Panel Descriptions

When pressed by themselves, MIX, WIPE and FX TRIG are mutually exclusive:

~Press MIX to select a mix effect only.

~Press WIPE to select a wipe effect only.

~Press FX TRIG to select an effects trigger only. KEY 1 and/or KEY 2 must be enabled, and a two-keyframe effect must be loaded in the selected keyer(s).

Two “combination” effects are also possible:

~Simultaneously press MIX + FX TRIG to select a mix effect, and simultaneously trigger a two-keyframe DVE effect.

~Simultaneously press WIPE + FX TRIG to select a wipe effect, and simultaneously trigger a two-keyframe DVE effect.

Again, with these combination effects, KEY 1 and/or KEY 2 must be enabled, and a two-keyframe effect must be loaded in the selected keyer.

Following are detailed descriptions of each button in the Effects Group:

~Press MIX to arm the M/E for a mix, using the layers enabled in the Next Transition Group. The mix can be performed manually with the T-Baror automatically with AUTO TRAN.

Please note:

A MIX can be performed with any combination of BG, KEY 1 and KEY 2.

A MIX + FX TRIG can only be performed when KEY 1 and/or KEY 2 is enabled, and the selected keyer has a two-keyframe effect loaded.

Note

After a mix transition has been armed, press and hold MIX to

 

display the Transition Menu.

 

 

~Press WIPE to arm the M/E for a wipe transition, using the layers enabled in the Next Transition Group. The wipe can be performed manually with the T-Bar, or automatically using AUTO TRAN.

Please note:

A WIPE can be performed with any combination of BG, KEY 1 and KEY 2.

A WIPE + FX TRIG can only be performed when KEY 1 and/or KEY 2 is enabled, and the selected keyer has a two-keyframe effect loaded.

Note

After a wipe transition has been armed, press and hold WIPE

 

to display the Wipe Menu.

 

 

~The FX TRIG (Effects Trigger) button enables you to run two-keyframe DVE effects from the control panel — either individually, or in combination with mix and wipe transitions. When a two-keyframe DVE effect is triggered, it runs forward from keyframe 1 to 2, or backward from

FSN Series • User’s Guide • Rev 01

 

87

 

Page 87
Image 87
Barco 26-0702000-00 manual display the Transition Menu, Control Panel Orientation, FSN Series • User’s Guide • Rev