Barco 26-0702000-00 Çî~åÅÉÇ=hÉó=cìåÅíáçåë, ~Key Type is reset to Luma, ~Key Fill is reset to Self

5. Menu Orientation

Keyer Menu

Restore

Default

Settings

When a copy is requested and DVE channels are involved, please note the following important points:

•All parameters on the Keyer Menu are copied, provided that DVE channels are assigned to both the source and destination keyers. If there is an incompatibility between keyers, the {Paste} button will be grayed out, and a message will appear in the keypads’ “prompt” section.

•All parameters on the DVE Assign Menu are not copied.

•All parameters on the DVE Menu are copied (e.g., the DVE effect as programmed).

•The DVE “arm” state in the control panel’s M/E Transition Section is copied.

^Çî~åÅÉÇ=hÉó=cìåÅíáçåë

From the Keyer Menu, press {Advanced} to display the Advanced Keyer Menu. For the selected keyer, the following advanced functions are provided on the Tool Bar:

•Press {Restore Default Settings} to return the selected keyer to its default settings, as follows:

~Clip, Gain and Opacity are reset to defaults.

~Key Type is reset to Luma.

~Key Fill is reset to Self.

~DVE Mode (if applicable) is reset to Key.

~DVE Mode enable (if applicable) is reset to On.

~The Key Source does not change.

168 FSN Series • User’s Guide • Rev 01