Manual background

5. Menu Orientation

System Menu

Set

Clock

Set

Date

01/18/10

Reset to

Default

Black on Invalid Video — when an input is selected on a bus, this preference controls how the system behaves when the input becomes invalid — such as when the input loses sync or video.

~On — shows black in place of the input signal, when the selected signal becomes invalid.

~Off — shows the input signal as is, when the selected signal becomes invalid. In this mode, non-synchronous and/or non-stable video will appear on the switcher’s output.

Important

It is highly recommended that you leave the Black on Invalid

 

Video preference On during production. The Off mode may

 

be useful during setup mode only.

 

 

Press {Set Clock} to set the system’s internal clock, which is used for various logging, reporting and other time-stamping functions. The clock is also used on various Multiviewer layouts.

When pressed, the Set Clock Keypad appears, with special keypad functions:

~Ensure that you use the HH:MM:SS format to set the clock (Hours:Minutes:Seconds).

~Use the {:} button as a separator between digits.

~Press {AM/PM} to switch between AM and PM as required.

~Press {12 HR / 24 HR} to switch between 12 and 24 hour modes.

Press {Set Date} to set the system’s internal calendar, which is also used for various logging, reporting and other date-stamping functions.

When pressed, the Set Date Keypad appears, with special keypad functions:

~Ensure that you use the MM/DD/YYYY format to set the date (Month:Day:Year).

~Use the {/} button as a separator between digits.

Press {Reset to Default} to return a highlighted preference to its default value.

256

 

FSN Series • User’s Guide • Rev 01

 

Page 256
Image 256
Barco 26-0702000-00 manual Menu Orientation, System Menu, FSN Series • User’s Guide • Rev