Barco 26-0702000-00 manual Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

Aux Menu

Please note:

•In the Aux table, buses are displayed as follows:

~Active Aux buses are displayed in gray.

~The highlighted Aux bus (on which sources can be switched) is displayed in light yellow.

~Aux buses that are not mapped, or for which physical Aux output cards are not installed, are grayed out.

•The Aux Menu and the Aux section on the panel work in sync with each other — selections on the physical Aux bus are reflected in the menu, and vice-versa (including the behavior of the SHIFT button). For example:

~When you press Aux 2 on the Aux Output Row, Aux 2 will become highlighted in the menu.

~When you press Aux 14 on the menu, Aux 14 on the Aux Output Row will light, along with the SHIFT button.

•To select an Aux bus, press the desired bus on the Touch Screen, or select the desired bus on the control panel’s Aux Output Row.

•Aux outputs 1 through 16 on the menu are identical to Aux bus buttons 1 through 16 (with SHIFT) on the panel, but note that Aux outputs 17 through 30 only appear on the Aux Menu.

•Source switching is performed on Aux Source Row in the normal manner.

FSN Series • User’s Guide • Rev 01 187