Barco 26-0702000-00 manual `~êÇ=oÉãçî~ä, Installation, FSN Series • User’s Guide • Rev

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 120
Image 120
`~êÇ=oÉãçî~ä

4. Installation

Card and Rear Panel Installation

7.Release the handles so that they spring back and lock into place.

8.Repeat from step 1 for all additional cards that you want to install.

9.When complete, re-install the chassis front door, close and secure.

`~êÇ=oÉãçî~ä

„To remove a card:

1.Open the chassis front door and remove it (if desired).

2.For the selected card, simultaneously squeeze the two black handles together on each ejector, then pull the ejectors away from the center of the card.

Squeeze together and pull

Manual background Squeeze together and pull

Figure 4-14. Card removal

Caution

Always pull both latches simultaneously. If you only use one latch, you can damage the card.

3.When both latches have disengaged from the chassis, remove the card completely and store it safely in an anti-static bag.

Important

Unused rear slots must always have blank panels installed.

4.Repeat from step 2 for all additional cards that you want to remove.

5.When complete, re-install the chassis front door (if required), close and secure.

120

 

FSN Series • User’s Guide • Rev 01

 

Page 120
Image 120
Barco 26-0702000-00 manual `~êÇ=oÉãçî~ä, Installation, FSN Series • User’s Guide • Rev