Barco 26-0702000-00 manual jìäíáéäÉ=t~óë=íç=qêáÖÖÉê, jLb=_~åâ=qêáÖÖÉêë, •Adjustable Color Effects

8. DVE Operations

Introduction to the DVE

•Adjustable Color Effects

~Keyframe overall brightness and contrast control

~Individual RGB brightness and contrast control

~Monochrome mode

~Hue and saturation control

~Invert mode on / off

•Adjustable Image Processing

~De-interlace mode: adaptive or field-to-frame

~Adjustable motion threshold

•Adjustable Image Effects

~Horizontal and vertical flip

~Keyframe freeze, freeze on run

~Strobe mode with adjustable rate

jìäíáéäÉ=t~óë=íç=qêáÖÖÉê

The following topics are discussed in this section:

•

•

M/E Bank Triggers PGM Bank Triggers

jLb=_~åâ=qêáÖÖÉêë

There are three ways to trigger dual keyframe DVE effects on the M/E bank:

•Manual trigger — simplified procedure:

~Program the dual keyframe effect.

~Enable the associated keyer on the M/E.

~Select the desired transition (e.g., mix key, wipe key, etc.). If you don’t enable MIX or WIPE, only the effect will run.

~Enable the FX TRIG button.

~Run the effect manually with the T-Bar.

•Menu trigger — simplified procedure:

~Program the dual keyframe effect.

~Enable the associated keyer on the M/E.

~Run the effect using the forward (X) and backward (W) buttons on the DVE menu.

Note

Please note the following important points:

•This method only runs the DVE effect.

•The FX TRIG button does not have to be enabled.

•The effect cannot be paused during the run interval.

FSN Series • User’s Guide • Rev 01 357