Barco 26-0702000-00 póëíÉã=jÉåì=cìåÅíáçåë, •Setup Functions at the top of the Palette, to bottom

5. Menu Orientation

System Menu

póëíÉã=jÉåì=cìåÅíáçåë

On the System Menu, navigation buttons are arranged in three groups:

•Setup Functions (at the top of the Palette)

•Miscellaneous Functions (at the bottom of the Palette)

•Tool Bar functions

Com

Setup

Ref and

Output

Setup

Input

Setup

Map

Buttons

External

DSK

Setup

Clean

Feed

Setup

Tally

Setup

DVE

Assign

Note	In the Setup Functions group, buttons are arranged in the
	recommended order in which the individual setup procedures
	should initially be performed — from left to right, and from top
	to bottom.

The following functions are provided in the Setup Functions group:

•Press {Com Setup} to display the Communications Setup Menu, which enables you to “discover” an FSN-1400 chassis (if required), and set up Ethernet. Refer to the “Communications Setup Menu” section on page 194 for details.

•Press {Ref and Output Setup} to display the Reference and Output Setup Menu, which enables you to set up the system’s video reference input, native resolution and output timing mode. Refer to the “Reference and Output Setup Menu” section on page 197 for details.

•Press {Input Setup} to display the Input Setup Menu, which enables you to set up both native and universal switcher inputs. Refer to the “Input Menu” section on page 202 for details.

•Press {Map Buttons} to display the Map Buttons Menu, which enables you to map inputs and internal sources to the control panel. Refer to the “Map Buttons Menu” section on page 224 for details.

•Press {External DSK Setup} to display the External DSK Setup Menu, which enables you to set up the DSK Cut and DSK Fill inputs. Refer to the “External DSK Setup Menu” section on page 229 for details.

•Press {Clean Feed Setup} to display the Clean Feed Setup Menu, which enables you to set clean feed outputs and the source for the ASSIGN button. Refer to the “Clean Feed Setup Menu” section on page 232 for details.

•Press {Tally Setup} to display the Tally Setup Menu, which enables you to set all tally relay closures. Refer to the “Tally Setup Menu” section on page 235 for complete details.

•Press {DVE Assign} to display the DVE Assign Menu, which enables you to assign DVE channels to keyers, and name the channels. Refer to the “DVE Assign Menu” section on page 238 for complete details.

190 FSN Series • User’s Guide • Rev 01