Barco 26-0702000-00 manual qêáÖÖÉê=pÉíìé=~åÇ=aáëéä~ó, qêáÖÖÉê=låäó=qê~åëáíáçå, DVE Operations

8. DVE Operations

Automatic DVE Triggering

qêáÖÖÉê=pÉíìé=~åÇ=aáëéä~ó

This section provides basic information about trigger setup. There are three types of triggers that can be armed on the panel, and each has its own special label in the Transition Display:

•A “Trigger only” transition runs the DVE effect only. The selected keyer does not mix or wipe. In the display, the label “ FX” indicates this type of trigger. Refer to the “Trigger Only Transition” section for details.

•A “Mix-key-trigger” transition runs the DVE effect and mixes the selected keyer. The label “M FX” indicates this type of trigger. Refer to the “Mix-key-trigger Transition” section for details.

•A “Wipe-key-trigger” transition runs the DVE effect and wipes the selected keyer. The label “W FX” indicates this type. Refer to the “Wipe-key-trigger Transition” section for details.

Basic setup for each trigger type is explained and illustrated in the following sections.

FX

TRIG

qêáÖÖÉê=låäó=qê~åëáíáçå

To arm a “trigger only” transition:

•Ensure that a dual keyframe DVE effect is loaded in the selected keyer(s).

•Enable one or two keyers in the Next Transition Group. The BG button can either be on or off, as required.

•Enable FX TRIG by itself in the Effects Group.

In the Transition Display, the label “ FX” indicates “trigger only,” as shown below (for keyer 1).

M	E M	F X K E Y 2	T R A N
2 1		C A M 1 G F X 2	3 0

BG	KEY	KEY
	1	2

MIX	WIPE	FX
		TRIG

Figure 8-21.“Trigger only” transition armed

Important	In this mode, the KEY 1 and/or KEY 2 buttons light to show
	which DVE effect(s) are armed to trigger — the buttons do not
	indicate a mix-key or wipe-key in this mode.

To always confirm which keyers are armed to trigger, press and hold FX TRIG. In this mode, the “lit” keyer buttons in the Next Transition Group are the ones that are armed to trigger. When you release the FX TRIG button, the group returns to its previous state.

398 FSN Series • User’s Guide • Rev 01