Barco 26-0702000-00 manual tçêâáåÖ=ïáíÜ=mçéJìéë, rëáåÖ=íÜÉ=hÉóé~Ç, Operations

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 317
Image 317
tçêâáåÖ=ïáíÜ=mçéJìéë

7. Operations

Working with Pop-ups

tçêâáåÖ=ïáíÜ=mçéJìéë

Please note the following important rules regarding pop-ups:

When a pop-up includes a button, or a series of buttons (e.g., {Yes} or {No}) you must acknowledge the pop-up with a decision before any other operations can be performed on the Touch Screen.

When a pop-up does not include a button, you must wait until the pop-up clears before any other operations can be performed on the Touch Screen. This condition only occurs on several menus, including:

~System Menu (during system initialization procedures)

~Software Menu (during the software update procedure)

~Backup and Restore Menu (during backup and restore procedures)

~Reset Menu (during various reset procedures)

When any pop-up is displayed, physical buttons on the control panel still function properly.

rëáåÖ=íÜÉ=hÉóé~Ç

There are two types of Keypads in the system:

Touch Screen Keypad — When any Value Button is pressed on the Touch Screen, the Keypad appears, enabling you to make numeric entries. In this mode, you can enter, trim, clear and undo entries with accuracy. In Chapter 5, refer to the “Using the Keypad” section on page 144 for details.

Control Panel Keypad — Any time that the Keypad is displayed on the Touch Screen, you can also use the Keypad on the control panel. Here, the “physical” Keypad works in parallel with the Touch Screen Keypad — either can be used for entry, depending on your preference.

All Keypad functions are the same, with the following exceptions:

~The {Undo} button is not present on the control panel’s Keypad.

~The AUTO TRAN button is not available in version 3.0.

~Press FINE ADJUST to change the sensitivity of the knobs and the Joystick.

Note

When off, adjustment is coarse.

When on, adjustment is fine.

The only time the Control Panel Keypad is used exclusively, is for storing and recalling memory registers. Refer to the “Working with Memory Registers” section on page 337 for full details.

FSN Series • User’s Guide • Rev 01

 

317

 

Page 317
Image 317
Barco 26-0702000-00 manual tçêâáåÖ=ïáíÜ=mçéJìéë, rëáåÖ=íÜÉ=hÉóé~Ç, Operations, FSN Series • User’s Guide • Rev