Barco 26-0702000-00 manual STORE or RECALL button, 4Keypad, Control Panel Orientation

3. Control Panel Orientation

Control Panel Descriptions

M/E 2

PGM

SYS

CUST

~Enable M/E 2 to include the entire M/E 2 bank in a store procedure, or remove the bank from a recall procedure. Using the Memory Menu, you can elect to include or exclude certain sub-sections of M/E 2.

Note	On the FSN-150, M/E 2 control must be enabled to fully utilize
	this memory module. In Chapter 7, refer to the “M/E 2
	Control on the FSN-150” section on page 349 for details.

~Enable PGM to include the entire PGM bank in a store procedure, or remove the bank from a recall procedure. Using the Memory Menu, you can elect to include or exclude certain sub-sections of the PGM bank in the procedure.

~Enable SYS to include system-related functions (such as input mappings and input setups) in the selected store procedure, or remove the functions from a recall procedure. Using the Memory Menu, you can elect to include or exclude certain system sub-functions.

~The CUST button is not available in version 3.0.

STILL

~The STILL button is not available in version 3.0.

AUX

DVE

~Enable AUX to include all Aux bus assignments currently on the panel in a store procedure, or remove the buses from a recall procedure. Using the Memory Menu, you can elect to include or exclude certain individual Aux buses.

~Enable DVE to include the current DVE effect (that is being programmed on the DVE Menu) in a store, or remove the stored effect from a recall. When you store a DVE memory register, all DVE channels currently containing keyframes will be stored. Using the Memory Menu, you can include or exclude selected DVE channels from the register.

Important	When working with memory registers, the system will not
	automatically display the Memory Menu unless you navigate
	to the menu on the Touch Screen, or press and hold the
	STORE or RECALL button.

Please note the following important references:

~In Chapter 5, refer to the “Memory Menu” section on page 174 for complete details on all switcher memory functions.

~In Chapter 7, refer to the “Working with Memory Registers” section on page 337 for more information about memory registers.

4)Keypad

The Keypad includes buttons that are arranged in a manner similar to the Touch Screen’s keypad. The following functions are context sensitive:

~When STORE or RECALL is lit, you can enter memory registers (from 1 through 1000).

~When a keypad appears on the Touch Screen, you can enter and trim values for numeric functions. In this mode, the physical Keypad works in

96 FSN Series • User’s Guide • Rev 01