Barco 26-0702000-00 manual System Setup, FSN Series • User’s Guide • Rev

6. System Setup

Universal Input Setup

2.Use the {Mask Top}, {Mask Bottom}, {Mask Left} and {Mask Right} controls to mask selected portions of the image, as required.

3.Select the method by which you want to size and scale the image. Masked edges are taken into account.

~Press {Fill H} to scale the selected universal input up (or down) to the current native horizontal resolution. Aspect ratio is maintained.

~Press {Fill V} to scale the input up (or down) to the current native vertical resolution. Aspect ratio is maintained.

~Press {Fill H/V} to scale the input up (or down) to the current native horizontal and vertical resolutions. Aspect ratio is not maintained.

4.If required, press {Reset Fill} to return the input to its previous scaling. Mask settings are retained.

5.If required, press {Clear Mask} to return all mask settings to 0 (zero). Scaling is maintained.

6.Press {Reset All} to return the input to its previous scaling, and return all mask settings to 0 (zero).

„Color Correction — Use the following steps to set up universal input color correction:

1.To adjust the selected input’s overall brightness and contrast, press {Bright Contrast}. Use the {Bright} and {Contrast} controls as desired.

2.To adjust the input’s RGB brightness, press {RGB Bright}. Use the {Red Bright}, {Green Bright} and {Blue Bright} controls as desired.

3.To adjust the input’s RGB contrast, press {RGB Contrast}. Use the {Red Contrast}, {Green Contrast} and {Blue Contrast} controls as desired.

4.To adjust hue and color saturation, press {Hue Sat}. Use the {Hue} and {Sat} controls as desired.

„Save Input Settings — Use the following steps to save input settings:

1.Press {Save Settings} to save the selected input’s setup parameters.

2.Press {Back} to return to the Input Menu.

3.Repeat from step 3 for each additional input that you wish to set up.

Important

Because you can install either a NIC or a UIC in slots 3 and 4, If you move or change card assignments in these two slots during setup, the setup is invalidated, and must be repeated once the final card configuration is reached.

FSN Series • User’s Guide • Rev 01 295