Barco 26-0702000-00 Menu Orientation, 192.168.0.4, System Menu, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

Set IP

Address

Set

Subnet

Mask

Apply

Restore

Default

Settings

•To change the IP address of a highlighted port, press {Set IP Address} to display the IP Address Keypad:

Set IP Address

Close

192.168.0.4

Undo

7 8 9 Clear

4 5 6 Trim -

1 2 3 Trim +

+ / - 0 . Enter

Figure 5-75.IP Address keypad (sample)

Enter the desired IP address using the decimal point as the separator between the four “octets,” and press {Enter}.

Note	You do not have to enter all three digits in a particular octet.
	For example, you can enter 4 instead of 004.

•To change the Subnet Mask of a highlighted port, press {Set Subnet Mask} to display the Subnet Mask Keypad. Enter the desired subnet mask using the decimal point as the separator between the four “octets,” and press {Enter}.

•After setting both the IP address and the Subnet Mask, press {Apply} to complete the procedure.

•To return the highlighted port’s IP address and Subnet Mask to their factory default values, press {Restore Default Settings}.

196 FSN Series • User’s Guide • Rev 01