Barco 26-0702000-00 Output V-LockInformation, Menu Orientation, FSN Series • User’s Guide • Rev

SDI

Output

Timing

Output

V-Lock

Info

5. Menu Orientation

System Menu

Important When {Output V-Lock}is On, the position of the DSK Cut and DSK Fill inputs on screen will change.

•If the user preference “Black on Invalid Video” is turned on, the DSK turns off — because of the change in output timing.

•If the user preference “Black on Invalid Video” is off, the DSK will be visible — but in a shifted position. In this condition, the video position can be adjusted by changing the output timing of the DSK source itself.

~Off — In this mode, you can not set H and V offsets, and the {Sync Mode} button is active on the Input Setup Menu.

Note	When {Output V-Lock}is turned Off, after having been On,
	all inputs return to Auto Mode on the Input Setup Menu.
Important
	When {Output V-Lock}is Off, the least amount of video
	delay is provided through the switcher. The DSK Cut and
	DSK Fill inputs must be within ± 0.5 line of video reference.

•When {Output V-Lock} is On, press {SDI Output Timing} to set SDI H and V offsets, anywhere relative to video reference. Two value buttons appear:

~Press {SDI H Offset} or use the adjacent Knob to set the desired amount of horizontal offset (in pixels) from video reference.

~Press {SDI V Offset} or use the adjacent Knob to set the desired amount of vertical offset (in lines) from video reference.

•Press the {Output V-Lock Info} button to display a pop-up with important information regarding the Output V-Lockmode. This button only appears when the {Reference Input} button is set to External.

Note	Output V-Lock Information
		Close

Please note the following important information:

When Output V-Lockis on, H and V offsets can be set anywhere relative to the external video reference input. All native inputs are forced to Frame Sync mode, and one frame of delay will be incurred on all native inputs. On the Input Setup Menu, the Sync Mode button is grayed out.

When Output V-Lockis off, you can not set H and V offsets. On the Input Setup Menu, the Sync Mode button is active.

Figure 5-80.Output V-Lock Information Pop-up

FSN Series • User’s Guide • Rev 01 201