Barco 26-0702000-00 manual sáÉï=bêêçêë, Menu Orientation, FSN Series User’s Guide Rev

5. Menu Orientation

System Menu

2

The following diagnostic functions are provided:

•The system provides eight GPO ports. To test the ports, connect target devices to the ports as required. Then, press any combination of buttons in the GPO section of the Palette to toggle the state of the selected port. In Appendix A, refer to the “GPIO Connector” section on page 444 for pinouts.

•The system provides four GPI ports. To test the ports, connect outputs from your target devices to the ports as required. Then, trigger the external devices locally (at the device itself) and note the results in the table on the Palette. In Appendix A, refer to the “GPIO Connector” section on page 444 for pinouts.

View

Errors

sáÉï=bêêçêë

From the Diagnostics Menu, press {View Errors} to display the View Errors Menu. The menu can also be accessed by pressing {View Error Info} from within a pop-up error message. The figure below illustrates a sample menu.

Figure 5-131.View Errors Menu (sample)

The View Errors Menu provides a comprehensive scrolling list of system errors along with technical support details and troubleshooting help (if available). In the Error Table, four columns of information are provided:

•Priority — all errors are assigned priority numbers.

264 FSN Series • User’s Guide • Rev 01