Barco 26-0702000-00 manual píçêÉI=_óé~ëë=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ, Operations

7. Operations

Working with Memory Registers

píçêÉI=_óé~ëë=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ

„Use the following steps to store a memory register, bypass the Enables menu, and enter a custom register description:

1.Set up the switcher in the exact configuration that you want stored.

2.On the Keypad, press STORE. By default, all available modules light in the keypad’s Module Section.

3.Select the desired modules to include (or exclude) in the register. If you don’t take any action, all modules remain enabled.

4.Enter the desired register number.

5.Navigate to the Memory Menu. The selected register will be highlighted in the table, and the “STORE” banner will be lit red.

6.Press {Description} to display the Pop-up Keyboard.

7.Enter the desired description and press {Enter}.

Note

In Store Mode, the description will not appear in the register table until ENTER is pressed on the Keypad.

8.Press ENTER on the Keypad. The register is stored with all Enables are on, along with the custom description. Above the Keypad, the selected register number and the custom description appear in the Memory Display, adjacent to the prefix “STR:”

píçêÉI=pÉí=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ

„Use the following steps to store a memory register, set Enables, and enter a custom register description:

1.Set up the switcher in the exact configuration that you want stored.

2.On the Keypad, press STORE. By default, all available modules light in the keypad’s Module Section.

3.Select the desired modules to include (or exclude) in the register. If you don’t take any action, all modules remain enabled.

4.Enter the desired register number.

5.Navigate to the Memory Menu. The selected register will be highlighted in the table, and the “STORE” banner will be lit red.

6.Press {Enables} to display the Enables Menu.

7.On the modules row, press the light blue button for the first module in which you want to set Enables.

8.In the “Enables” box, toggle the desired Enables on or off, as required. By default, they are all on, when you first store a register. Remember that you can also use the {All On} and {All Off} functions.

9.Repeat steps 7 and 8 for all remaining modules in which you want to set Enables.

10.Press {Description} to display the Keyboard.

340 FSN Series • User’s Guide • Rev 01