Barco 26-0702000-00 manual mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå, Avertissement, Warnung, Installation

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 115
Image 115
mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå

4. Installation

FSN-1400 System Connections

mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå

The FSN-1400 is rated to operate with the following specifications:

Input Power: 100-240 VAC, 50-60 Hz

Power Consumption: 800 watts maximum

The FSN-150 is rated to operate with the following specifications:

Input Power: 100-240 VAC, 50-60 Hz

Power Consumption: 150 watts maximum

Each FSN Series component performs line voltage selection automatically, and no user controls are required. The AC power cords must be accessible so that they can be removed during field servicing.

Warning

When the FSN-1400 or FSN-150 control panel is used in the 230-volt mode, a UL listed line cord rated for 250 volts at 15 amps must be used and must conform to IEC-227 and IEC- 245 standards. This cord will be fitted with a tandem prong- type plug.

The rear panel ON/OFF switch does not disconnect the unit from input AC power. To facilitate disconnection of AC power, the power cord must be connected to an accessible outlet near the unit.

Building Branch Circuit Protection (minimum requirements): For 115 V use 20 A, for 230 V use 8 A.

Figure 4-10.Tandem Prong-type Plug

Avertissement

La choix de la ligne de voltage se réalise automatiquement par le FSN Series Transformateur Graphique. On n'a pas besoin du controller usager pour la choix de la ligne de voltage.

Warnung

Das FSN Series gerät mu beim Anschlu an 240V ~ mit einer vom VDE auf 250V/10A geprüften Netzleitung mit einem Schukostecker ausgestattet sein.

FSN Series • User’s Guide • Rev 01

 

115

 

Page 115
Image 115
Barco 26-0702000-00 manual mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå, Avertissement, Warnung, Installation