Barco 26-0702000-00 ëëáÖå=pçìêÅÉ=hÉóé~Ç, Multiviewer Operations, FSN Series • User’s Guide • Rev

9. Multiviewer Operations

Multiviewer Menu Orientation

^ëëáÖå=pçìêÅÉ=hÉóé~Ç

From the Multiviewer Setup Menu, press {Assign Source} to display the Assign Source Keypad. This keypad enables you to assign a source to the highlighted PIP (as indicated in the Multiviewer Table).

Sources

Aux

Other

Select the source to assign to	Close
PIP 1

CAM1	Sources
CAM2
CAM3	Aux
CAM4

DO-1

Other

DO-2

VT-A

VT-B

Apply

Figure 9-5.Assign Source Keypad (sample)

In the keypad, use the up (S) and down (T) arrows to locate the desired source in the list, then press {Apply} to accept. When a source is assigned, its current name appears in the PIP’s UMD — but this name can be changed using the {UMD Text} function.

Three types of PIP sources are available:

Press {Sources} to assign input sources to the selected PIP, e.g., those sources that appear on the control panel.

Press {Aux} to assign Aux output video to the selected PIP, e.g., Aux 1, Aux 2, etc. Note that these Aux PIPs will not reflect Aux output scaling.

Press {Other} to assign Program and Preview output video to the selected PIP, e.g., Program, Preview, M/E 1 PGM, etc.

422 FSN Series • User’s Guide • Rev 01