Barco 26-0702000-00 manual aÉäÉíáåÖ=jÉãçêó=oÉÖáëíÉêë, Operations, FSN Series • User’s Guide • Rev

7. Operations

Working with Memory Registers

~If currently unlocked, press {Lock Unlock} to lock the register. An “X” appears in the table cell under the Lock heading. The register can not be deleted or over-written.

~If currently locked, press {Lock Unlock} to unlock the register and remove the “X” from the table cell. The register can now be deleted and over-written.

6.Repeat from step 3 to lock or unlock additional registers.

aÉäÉíáåÖ=jÉãçêó=oÉÖáëíÉêë

The View Mode is the only mode in which you can delete registers.

„Use the following steps to delete memory registers:

1.Ensure that you are not in the Store or Recall modes. If so, cancel the mode.

2.Navigate the Memory Menu using one of the following methods:

~In the Menu Bar, press {Page} to display page 2 (if required). Then, press the {Memory} button.

~Press and hold either the STORE or RECALL button in the control panel’s Memory Section.

3.Select the register that you want to delete. Two methods are available:

~Turn the knob adjacent to the {Memory Register} button to scroll to the desired register.

~Press the {Memory Register} button, then on the keypad, enter the desired register and press {Enter}.

4.Press {Advanced} to display the Advanced Memory Menu.

5.Ensure that the register is unlocked. If not, unlock it using {Lock Unlock}.

6.Press the {Delete Register} button to delete the register. When the “confirm” pop-up appears, press {Yes}.

7.Repeat from step 3 to lock or unlock additional registers.

FSN Series • User’s Guide • Rev 01 345