Barco 26-0702000-00 manual ìíçã~íáÅ=qêáÖÖÉêáåÖ=îá~=íÜÉ=`çåíêçä=m~åÉä=, DVE Operations

8. DVE Operations

Automatic DVE Triggering

^ìíçã~íáÅ=qêáÖÖÉêáåÖ=îá~=íÜÉ=`çåíêçä=m~åÉä=

The FX TRIG (Effects Trigger) button in the M/E’s Effects Group enables you to automatically run dual keyframe DVE effects from the control panel. You can trigger effects individually or in combination with transitions.

Transition Display

M E M K E Y 1 K E Y 2 T R A N

2 1 P C 2 V T R 1 3 0

Next Transition Group

Effects

Group

BG	KEY	KEY
	1	2
MIX	WIPE	FX
		TRIG
CUT		AUTO
		TRAN

MIX	MIX
KEY 1	KEY 2

CUT	CUT
KEY 1	KEY 2

FX

TRIG

Figure 8-20.M/E Transition Section (sample)

In the M/E Transition Section, as shown above, three group of controls determine how your dual keyframe DVE effects behave:

•The buttons in the Next Transition Group show which combination of layers are armed for the next transition.

•The buttons in the Effects Group indicate which combination of effects (including DVE triggers) are enabled for the next transition.

•The Transition Display indicates which specific DVE channel(s) are armed to trigger — the DVE channel assigned to Keyer 1, Keyer 2 or to both keyers.

With one or more DVE channels installed in the FSN-1400, the FX TRIG button works by itself, or in combination with the MIX and WIPE buttons — similar to the way that the buttons in the Next Transition Group behave. Whichever combination you enable automatically disables those buttons that were not pressed.

For example:

•Pressing FX TRIG by itself allows you to trigger DVE effects only, without mixing or wiping backgrounds or keys.

•Pressing FX TRIG + MIX enables you to mix keys and backgrounds in the normal way, and trigger one or two effects.

•Pressing FX TRIG + WIPE enables you to wipe keys and backgrounds in the normal way, and trigger one or two effects.

FSN Series • User’s Guide • Rev 01 397