Barco 26-0702000-00 `äçÅâ=pÉíìé=jÉåì, Multiviewer Operations, FSN Series • User’s Guide • Rev

UMD Color 1

9. Multiviewer Operations

Multiviewer Menu Orientation

Press {UMD Color 1} to select a specific color that can be assigned to any UMD. Use the Color Wheel, the Color Chips, the User Colors or the Knobs to select the desired color. Select colors for {UMD Color 2}, {UMD Color 3} and {UMD Color 4} in the same manner.

Once colors are assigned, use the {UMD Color} button on the Multiviewer Setup Menu to assign colors to specific PIP UMDs.

Note	Remember that UMD colors can be used to “group” sources.
	For example, if you want to visually distinguish your cameras
	or servers from other Multiviewer sources, create and assign
	a custom UMD color.

Clock Source

Internal

Clock

Display

12 HR

`äçÅâ=pÉíìé=jÉåì

From the Multiviewer Setup Menu, press {Clock Setup} to display the Clock Setup Menu. These functions apply whenever a layout is selected that includes a clock.

Two functions are available:

Press {Clock Source} to toggle the clock source between Internal and LTC.

•When set to Internal, the system’s internal clock is displayed. Remember that time is set on the User Preferences Menu. In Chapter 5, refer to the “User Preferences Menu” section on page 254 for details.

•When set to LTC, the Multiviewer card’s LTC (Longitudinal Time Code) Input is used. In Chapter 2, refer to the “Multiviewer Card” section on page 62 for details on the types of time code connections that can be used.

Press {Clock Display} to toggle the clock between 12 HR and 24 HR modes.

FSN Series • User’s Guide • Rev 01 421