Barco 26-0702000-00 manual Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

The images below represent two examples of Fill V.

1024 x 768 scaled up

to 1920 x 1080

1920 x 1080 scaled down

to 1024 x 768

Fill

H/V

Figure 5-97.Fill V examples

~Press {Fill H/V} to scale the selected universal input up (or down) to the current native horizontal and vertical resolutions. Please note:

•Aspect ratio is not maintained. Non-proportional image stretching or compression will occur.

•If any edges of the image are manually masked, those edges are used for the Fill H/V calculations.

The images below represent two examples of Fill V.

1024 x 768 scaled up

to 1920 x 1080

1920 x 1080 scaled down

to 1024 x 768

Pan

Zoom

Source

Figure 5-98.Fill HV examples

~Use the {Reset} function to reset all size and position values to default.

•In the Input Sizing and Scaling section, press {Pan Zoom Source} to display four value buttons that enable you to size and position the video within the boundaries of the image’s current sizing. In this mode, the outside boundaries remain constant, but you can pan and zoom the video inside, as desired.

Note	The Pan Zoom Source function does not allow you to reveal
	video that is outside of the input’s active area.

The following functions are provided:

~Press {Source H Size} or use the knob to change the source image’s horizontal size. Remember that {Source H Size} and {Source V Size} track together if the {Lock} is enabled.

FSN Series • User’s Guide • Rev 01 221