Barco 26-0702000-00 manual lìíéìí=~åÇ=mêçÅÉëë=m~åÉä, lìíéìí=pÉÅíáçå, •Output Status Section

5. Menu Orientation

System Menu

Output

and

Process

Output Format

Adv.

Output

Setup

lìíéìí=~åÇ=mêçÅÉëë=m~åÉä

From the UOC Setup Menu, press {Output and Process} to display the Output and Process Panel, which is divided into three sections plus several tool bar functions. Each section is explained below.

•Output Section

•Output Processing Section

•Output Status Section

•Output and Process Tool Bar Functions

•Advanced UOC Output Setup Menu

lìíéìí=pÉÅíáçå

The figure below illustrates the Output Section on the Output and Process Panel:

Output
	Output	Adv.
		Output
	Format
		Setup

Figure 5-115.Output Section, Output and Process Panel

The following adjustments are provided:

•Press {Output Format} to display the Output Format Keypad. Use the up (S) and down (T) arrows to locate the desired output format in the list, then press {Apply} to set the new Aux output format. In Appendix A, see the “Input and Output Format Tables” section on page 445 for the complete list of formats.

•Press {Advanced Output Setup} to display the Advanced UOC Setup Menu, which enables you to adjust advanced UOC output parameters. Refer to the “Advanced UOC Output Setup Menu” section on page 247 for details.

Caution	The Advanced UOC Setup Menu is designed for advanced
	users who are completely familiar with all aspects of output
	timing adjustments. Do not use this menu if you are uncertain
	about any output timing parameter.

244 FSN Series • User’s Guide • Rev 01