Barco 26-0702000-00 manual _~ÅâáåÖ=ré=~åÇ=oÉëíçêáåÖ=íÜÉ=póëíÉã, _~ÅâáåÖ=ré=íÜÉ=póëíÉã, Operations

Touch the desired location on the touch screen, or for more accuracy, use the eraser end of a pencil.

7. Operations

Backing Up and Restoring the System

_~ÅâáåÖ=ré=~åÇ=oÉëíçêáåÖ=íÜÉ=póëíÉã

The following topics are discussed in this section:

•

•

Backing Up the System Restoring the System

_~ÅâáåÖ=ré=íÜÉ=póëíÉã

The system backup procedure enables you to store the entire system setup to a USB drive, including all memory registers and the DVE shot box.

Note

You can only write one backup file in a selected folder. If you wish to store multiple backup files on a single USB drive, create additional folders as required.

„Use the following steps to back up the system:

1.Navigate to the System Menu:

~In the Menu Bar, press {Page} to display page 2 (if required). Then, press the {System} button.

2.Press {Backup and Restore} to display the Backup and Restore Menu.

3.Insert a USB drive into the USB Port on the top of the control panel.

4.Press {Backup System} to display the Backup Menu.

5.In the directory, navigate to the folder in which you want to store a backup file.

Tip

~To open or close a highlighted folder, press {Open/Close} as required.

~If required, press {Create New Folder} to create a new folder at the current location in the directory.

~As required, press {Rename Folder} to rename the highlighted folder.

6.Press {Backup System} to create the backup file. If the selected directory already contains a backup file, you will be asked to confirm an “overwrite,” or cancel the operation.

Please note:

•You cannot delete, move or copy files (or folders) using the touch screen interface. To accomplish these functions, use your PC.

350 FSN Series • User’s Guide • Rev 01