Barco 26-0702000-00 manual qóéÉ, Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

Keyer Menu

•All selections and functions for the new keyer appear on the Keyer Menu.

Important

If you select a keyer that has a DVE channel assigned, DVE- specific functions appear on the Palette. Refer to the “DVE Keyer Functions” section on page 164 for details.

qóéÉ

The {Type} button is a pop-up that enables you to select the processing mode for the selected keyer.

Luma

Linear

Type

Luma

Figure 5-41.Key type pop-up

Press {Type} to display the Key Type Pop-up, which offers two options:

•{Luma} — Enables the Luminance Key mode, in which the hole-cutting information is derived from the luminance (brightness) level of the key source.

•{Linear} — Enables the Linear Key mode, which allows the edges of anti-aliased key sources (such as character generators) to be reproduced clearly. Two separate signals are required from a linear key source: a cut and a fill. Refer to the “Map Buttons Menu” section on page 224 for mapping details.

Note

When Linear Key mode is selected, the {Key Fill} button is grayed out. This occurs because the linear key cut and fill signals are pre-determined on the Map Buttons Menu.

160 FSN Series • User’s Guide • Rev 01