Barco 26-0702000-00 manual •AUTO TRAN •MIX KEY 1 and MIX KEY, Control Panel Orientation

3. Control Panel Orientation

Control Panel Descriptions

~Key 1 Source and DVE trigger status — this field is located directly above the KEY 1 button. The following indications are provided:

•In key mode, the top line is the field title: KEY1. The bottom line displays the source assigned to the keyer. When you select another source on the Key Bus, the bottom label updates.

•When a DVE channel is assigned to the keyer and a two- keyframe effect is loaded, the top line provides trigger status. Three labels are possible:

– “_ FX” indicates that only the DVE effect is armed to trigger.

–“M FX” indicates that the keyer is armed to mix, and the DVE effect is simultaneously armed to trigger.

–“W FX” indicates that the keyer is armed to wipe, and the DVE effect is armed to trigger.

In this mode, the bottom line indicates the input source to the assigned DVE channel.

~Key 2 Source and DVE trigger status — this field is located directly above the KEY 2 button. Key source and DVE status indications are identical to those for KEY 1 — but for KEY 2 instead.

Note

Remember that the SEL button chooses the active key bus, as indicated by the Key Control LEDs.

~Current Transition Rate — indicates the auto-transition rate loaded in the M/E. This rate is used by the following functions:

•AUTO TRAN

•MIX KEY 1 and MIX KEY 2

•DVE effect duration (for two-keyframe effects)

Use the Transition Menu to change rates. In Chapter 5, see the “Transition Menu” section on page 148 for details.

2)T-Bar and Transition LEDs

The T-Barprovides manual transition control for the layers enabled in the Next Transition Group — including mixes, wipes and two-keyframe DVE effects. For both manual and automatic transitions, the Transition LEDs always indicate the position of the transition in progress.

Transition LEDs

T-Bar

Figure 3-14.T-Bar and Transition LEDs

T-Barfunctionality is identical for the M/E and PGM banks. In Chapter 7, refer to the “Understanding the T-Bar and Transition LEDs” section on page 325 for complete details.

84 FSN Series • User’s Guide • Rev 01