Barco 26-0702000-00 manual pÜ~Ççï=pÉÅíáçå, DVE Operations, FSN Series • User’s Guide • Rev

Border

Luma

46

Width

10

Border

Units

Pixels

Reset

Shadow

On

Shadow

Size

Position

Shadow

H Size

100

Shadow

V Size

100

Shadow

H Pos

7

8. DVE Operations

DVE Menu Orientation

•Press {Border Luma} or use the adjacent knob to select the desired border luminance value.

•Press {Width} or use the adjacent knob to select the desired border width.

~If the {Border Units} button is set to Pixels, the button’s label reads “Width.”

~If the {Border Units} button is set to Percent, the button’s label reads “Width (%).”

•Press {Border Units} to toggle the method by which border width is calculated.

~When set to Pixels, the border width remains constant as PIP size changes.

~When set to Percent, the border width adjusts automatically as a percentage of PIP size.

•Press {Reset} to reset all border values to default.

pÜ~Ççï=pÉÅíáçå

The following functions are provided in the Shadow Section:

•Press {Shadow} to toggle the PIP’s shadow on and off. Note that all shadow calculations are fixed as a percentage of PIP size.

•Press {Shadow Size Position} to display the four shadow value buttons.

•Press {Shadow H Size} or use the adjacent knob to adjust the shadow’s horizontal size. Remember that {Shadow H Size} and {Shadow V Size} track together if the {Lock} is enabled.

•Press {Shadow V Size} or use the adjacent knob to adjust the shadow’s vertical size. Remember that {Shadow H Size} and {Shadow V Size} track together if the {Lock} is enabled.

•Press the {Lock} button to lock or unlock H and V shadow size tracking. When locked, both parameters track together. When unlocked, H and V can be adjusted independently.

•Press {Shadow H Pos} or use the adjacent knob to adjust the shadow’s horizontal position.

FSN Series • User’s Guide • Rev 01 379