Manual background

BG

KEY

1

3. Control Panel Orientation

Control Panel Descriptions

3)Next Transition Group

The three buttons in the Next Transition Group indicate which combination of layers is armed for the next transition. The state of these buttons affects the M/E’s “lookahead” preview output.

BG

KEY

KEY

1

2

 

Figure 3-15.Next Transition Group

To use the group, simultaneously press the combination of buttons that you wish to arm. Any combination can be pressed. Whichever combination you enable automatically disables those buttons that were not pressed.

For example:

SIf BG, KEY 1 and KEY 2 are lit, pressing BG turns the BG button on, and turns off the KEY 1 and KEY 2 buttons.

SIf KEY 1 is lit, simultaneously pressing BG and KEY 2 turns the BG and KEY 2 buttons on, and KEY 1 off.

Following are descriptions of each button in the Next Transition Group:

~Enable BG to arm the background layer for a transition.

When BG is on, the selected PST source appears in the M/E’s preview monitor output. When the transition is performed, the PST source flips to BG.

When BG is off, the selected PST source does not appear in the M/E preview output. The current BG source is held during the next transition — even if a different PST source is selected.

~Enable KEY 1 to arm one of the following transitions:

When armed in conjunction with MIX or WIPE, you can transition the KEY 1 layer. The red LED above the button lights when the key is on.

When armed in conjunction with FX TRIG, you can trigger a two-keyframe DVE effect. A DVE channel must be assigned to KEY 1 and a two-keyframe DVE effect must be loaded.

When armed in conjunction with MIX and FX TRIG, you can mix KEY 1 and simultaneously trigger a DVE effect.

When armed in conjunction with WIPE and FX TRIG, you can wipe KEY 1 and simultaneously trigger a DVE effect.

Please note the following important points regarding KEY 1 transitions:

If KEY 1 is off and you enable it, the next transition turns the key on. The key source appears in the M/E’s preview output.

If KEY 1 is on and you enable it, the next transition turns the key off. The key is removed from preview — showing the M/E’s next look.

Press and hold KEY 1 to display the Key Menu, with Key 1 highlighted.

If KEY 1 is off, the layer will not transition. If the key is currently off, it stays off. If the key is currently on, it holds.

If KEY 1 and KEY 2 are off, you cannot enable FX TRIG.

FSN Series • User’s Guide • Rev 01

 

85

 

Page 85
Image 85
Barco 26-0702000-00 manual Control Panel Orientation, 3Next Transition Group, FSN Series • User’s Guide • Rev