Barco 26-0702000-00 2T-Barand Transition LEDs, 3Next Transition Group, Control Panel Orientation

3. Control Panel Orientation

Control Panel Descriptions

~DSK Source — (directly above the DSK button), indicates the current source assigned to the downstream keyer. When you select another source on the Phantom Key Bus, the source label updates.

Note

If a DVE is assigned to the DSK, and the DVE is enabled (either in PIP or KEY mode), this label indicates the source routed to the DVE — in other words, the DVE’s input. DVE assignment status is listed on the DVE Assign Menu.

In Chapter 8, refer to the “DVE Assign Menu” section on page 363 for details.

~Current Transition Rate — indicates the auto-transition rate loaded in the PGM bank. This rate is used by the AUTO TRAN and DSK functions. Use the Transition Menu to change rates. In Chapter 5, see the “Transition Menu” section on page 148 for details.

~Current Fade to Black Rate — indicates the auto-transition rate for the fade to black (FTB) function. Use the Transition Menu to change rates.

2)T-Bar and Transition LEDs

The T-Barprovides manual transition control for the layers enabled in the Next Transition Group. For both manual and automatic transitions, the Transition LEDs always indicate the position of the transition in progress.

Transition LEDs

T-Bar

Figure 3-8.T-Bar and Transition LEDs

T-Barfunctionality is identical for both the M/E bank and the PGM bank. In Chapter 7, refer to the “Understanding the T-Bar and Transition LEDs” section on page 325 for complete details.

3)Next Transition Group

The two buttons in the Next Transition Group indicate which specific combination of layers is armed for the next transition. The state of these buttons affects the bank’s “lookahead” preview output.

BG

DSK

Figure 3-9.Next Transition Group

To use the group, simultaneously press the combination of buttons that you wish to enable. Any combination can be pressed. Whichever combination you enable automatic disables those buttons that were not pressed.

FSN Series • User’s Guide • Rev 01 77