Barco 26-0702000-00 råáîÉêë~ä=lìíéìí=`~êÇ, FSN-1400Orientation, 1 2 1, 1Ejectors, 2Card Power LED

2. FSN-1400 Orientation

Card Descriptions

råáîÉêë~ä=lìíéìí=`~êÇ

„Card status: Optional

„Installs in slots: 11, 12, 13

„Default slot: 12

„Maximum number of cards per chassis: 3

The UOC (Universal Output Card) is an optional two-channel scaler card that creates scaled video and/or computer Aux outputs up to UXGA or 1920 x 1080. Users can set the output resolution to be different from (or the same as) the system’s native resolution.

When UOCs are installed, use the Aux Setup Menu to map Aux outputs to the control panel, and name Aux outputs (if desired). Refer to the “Card Slot Allocation and System Flexibility” section on page 35 for details on UOC configurations in the FSN-1400.

The figure below illustrates the UOC’s front edge and rear panel connectors:

1

2

1

Universal Output Card

UOC

Power Loaded

3

1 Analog

DigitalDVI

SDI

DigitalDVI

Analog

2

4

5

		Front Edge				Rear Panel
	Figure 2-11.UOC front edge and rear panel connectors
1)	Ejectors		3)	Loaded LED	5)	Universal Output 2
2)	Card Power LED		4)	Universal Output 1

Following are descriptions of all UOC components:

1)Ejectors

Use the card’s top and bottom Ejectors to remove (and re-insert) the card.

2)Card Power LED

The Card Power LED indicates power status for the card. Refer to the “Card LEDs” section on page 64 for details.

58 FSN Series • User’s Guide • Rev 01