Barco 26-0702000-00 manual Box KF field, DVE Operations, FSN Series • User’s Guide • Rev

8. DVE Operations

DVE Menu Orientation

The following shot box functions are provided:

1

OTS Left

Save

Shot Box

KF

Name

Shot Box

KF

•Select the desired keyframe in the Keyframe Editing Section (1 or 2), then select the desired shot box register. Once selected, the keyframe settings saved in the register are immediately copied into the selected keyframe, and the assigned name appears in the Shot Box KF field.

•Press {Save Shot Box KF} to initiate the process of storing the current effect keyframe into a shot box register. Once pressed, all shot box registers turn blue, enabling you to record into an empty shot, or over-write an existing shot.

~To perform the save, press the desired shot box button (e.g., 28). Once pressed, the settings in the selected effect keyframe are copied into the shot box register.

~If you save to an empty register, the Keyboard appears, enabling you to name the new shot box register immediately.

~If you save to an existing register (over-writing the register), the previous name is retained. You can elect to re-name the register if desired.

•Select a shot box register (to highlight it), then press {Name Shot Box KF} to initiate the process of naming (or re-naming) a register. The keyboard appears, with the register’s current name in the keyboard’s entry field. Enter the new name and press {Enter} to accept.

Please note:

~By default, letters append to the current name.

~Names are limited to eight characters or less.

~The {Name Shot Box KF} button is grayed out if no shot box buttons are selected (e.g., after a register is deleted).

Delete

Shot Box

KF

Important	Be aware that when you select a shot box register to name
	(or re-name), you are also assigning it to the currently
	selected keyframe. The new name will appear in the Shot
	Box KF field.

•Press {Delete Shot Box KF} to initiate the process of deleting a show box register. Next, press the button for the register you wish to delete. Once pressed, the register is deleted and the {Delete Shot Box KF} is un-selected. Note that there is no “confirm” for the delete procedure, nor is there an “undo.”

382 FSN Series • User’s Guide • Rev 01