Barco 26-0702000-00 manual rëÉê=mêÉÑÉêÉåÅÉë=cìåÅíáçåë, Menu Orientation, rëÉê=mêÉÑÉêÉåÅÉë=q~ÄäÉ

Set

9

				5. Menu Orientation
					System Menu
rëÉê=mêÉÑÉêÉåÅÉë=q~ÄäÉ
The figure below illustrates a sample User Preferences Table.
Name				Description	Setting
Bus Display Brightness	Range:	1	– 4 (1 = dim, 4 = bright)		3
Control Panel Backlight	Range:	1	– 10	(1 = dim, 10 = bright)	7
Touch Screen Brightness	Range:	1	– 10	(1 = dim, 10 = bright)	9
Transition Display Brightness	Range:	1	– 10	(1 = dim, 10 = bright)	10
Transition Display Contrast	Range:	1	– 10	(1 = low contrast, 10 = high contrast)	10
Black on Invalid Video	Range:	On/Off			On

Figure 5-124.User Preferences table (sample)

The User Preferences Table lists all available preferences, except for those provided in the Tool Bar. The yellow highlight indicates the preference that can be changed. To move the highlight, touch any row or use the top knob.

The following columns of information are provided:

•Name — lists the name of the user preference.

•Description — lists the range of the selected user preference.

•Setting — lists the preference’s current setting.

The {Set} button always applies to the highlighted preference, and the value shown in the button’s insert changes as different preferences are selected. Press {Set} to display the keypad for the selected preference in the table, enabling you to change its value.

rëÉê=mêÉÑÉêÉåÅÉë=cìåÅíáçåë

The following user preferences are provided:

•Bus Display Brightness — controls the brightness of the programmable displays above the PGM and M/E banks.

Range: 1 (dim) to 4 (bright)

•Control Panel Backlight — controls the overall brightness of all buttons on the control panel.

Range: 1 (dim) to 10 (bright)

•Touch Screen Brightness — controls the brightness of the Touch Screen. Range: 1 (dim) to 10 (bright)

•Transition Display Brightness — controls the brightness of the LCD displays above the M/E Transition Section, PGM Transition Section, Memory Section and Custom Section.

Range: 1 (dim) to 10 (bright)

•Transition Display Contrast — controls the contrast of the LCD displays above the M/E Transition Section, PGM Transition Section, Memory Section and Custom Section.

Range: 1 (low contrast) to 10 (high contrast)

FSN Series • User’s Guide • Rev 01 255