3)M/E Card Panel

2. FSN-1400 Orientation

Hardware Description

~UIC panels. Up to five panels can be installed in slots 3 through 7. Refer to the “Universal Input Card” section on page 55 for details.

3)M/E Card Panel

Slot 8 is reserved for the required M/E card panel. Refer to the “M/E Card” section on page 49 for details.

4)DVE (Blank) Panel

Slots 9 and 10 are reserved for blank panels, as the DVE card does not require any connectors. See the “Digital Video Effects Card” section on page 57.

5)Aux and MVR Output Card Panels

Slots 11, 12 and 13 are reserved for three types of optional cards:

~UOC (Universal Output Card). Up to three panels can be installed. See the “Universal Output Card” section on page 58.

~NAC (Native Aux Output Card). Up to three panels can be installed. See the “Native Aux Output Card” section on page 60.

~MVR (Multiviewer Card). One panel can be installed in slot 11 only. See the “Multiviewer Card” section on page 62.

6)System Card Panel

Slot 14 is reserved for the System card panel. Refer to the “System Card” section on page 44 for details.

7)AC Power

The AC Power section provides two AC power connectors with integral switches. One connector is provided for each supply, which allows the frame to be powered from two different circuit breakers in a redundant configuration.

Note

Important

The default FSN-1400 configuration has one power supply installed in the lower slot. The bottom AC connector is used.

Unused rear slots must have blank panels installed for purposes of thermal management and EMI.

42

 

FSN Series • User’s Guide • Rev 01

 

Page 42
Image 42
Barco 26-0702000-00 3M/E Card Panel, 4DVE Blank Panel, 5Aux and MVR Output Card Panels, 6System Card Panel, 7AC Power