Barco 26-0702000-00 manual •On the Enables Menu, Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

Memory Menu

•Module Section — Below the table is a matrix of buttons, one for each module. Lines are drawn to the corresponding cells in the table for reference. Please note:

~For version 3.0, the CUST and STILL buttons are grayed out.

~In Store Mode, the M/E 1, PGM, SYS, AUX and DVE buttons are always blue, indicating their availability for storage or modification. When selected, the button is bordered in yellow, and its corresponding Enables appear in the Enables Section.

~In Recall and View modes, if a button is grayed out, that module was not stored in the selected register. If a button is blue, it can be selected and modified (in Recall mode), or viewed (in View mode).

•Enables Section — When a blue button is selected in the Module Section, the bottom portion of the menu shows all available Enables for that module. The title of this section (in the black bar) changes as different modules are selected.

Depending on the mode, the Enables can be viewed (only), or modified:

~In View Mode, Enables can only be viewed.

~In Store Mode, Enables can be modified. All Enables will be on by default, when you enter the Store Mode.

~In Recall Mode, Enables can be modified — but only those that were originally “enabled” in the selected register.

When an Enable is modified, it can be toggled on or off as desired.

~When toggled On, the Enable is included in the selected memory Store or Recall operation.

~When toggled Off, the Enable is excluded from the selected memory Store or Recall operation.

~When an Enable is grayed out, it was not included in a previous memory Store operation.

Refer to the “Enable Descriptions” section on page 180 for explanations of each category of Enables.

The following functions are also available:

•Registers can be selected with the top knob, or by pressing the {Memory Register} value button. Refer to the “Selecting Registers” section on page 183 for details.

•Press {Description} to display the keyboard, which enables you to enter a register description (or name). Refer to the “Naming Registers” section on page 184 for details.

•Press {Advanced} to display the Advanced Memory Menu, which allows you to delete and lock registers. The menu is only available in View Mode. Refer to the “Advanced Memory Functions” section on page 185 for details.

•On the Enables Menu:

~Press {All On} to toggle all Enables on during a Store or Recall operation.

~Press {All Off} to toggle all Enables off during a Store or Recall operation.

FSN Series • User’s Guide • Rev 01 179