| Figure 49: VPN Wizard - General |
|
|
General Settings | |
Policy Name | Enter a suitable name. This name is not supplied to the remote VPN. It is |
| used only to help you manage the policies. |
|
|
Enable Policy | Enable or disable the policy as required. For each remote VPN, only 1 |
| policy can be enabled at any time. |
|
|
Remote VPN | The Internet IP address of the remote VPN endpoint (Gateway or client). |
Endpoint | • Dynamic. Select this if the Internet IP address is unknown. In this |
| case, only incoming connections are possible. |
| • Fixed. Select this if the remote endpoint has a fixed Internet IP |
| address, and enter the IP address. |
| • Domain Name. Select this if the remote endpoint has a Domain |
| Name, and enter the Domain Name. |
|
|
Keys | Select Manually assigned or IKE (Internet Key Exchange) as required. |
| If you are setting up both endpoints, using IKE is recommended. |
|
|
2.Click Next to continue. You will see a screen like the following:
74
