TRENDnet VPN Firewall Router Data - Special Applications Screen, Using a Special Application

TW100-BRV204 User Guide

	Figure 28: Special Applications Screen
Data - Special Applications Screen
Checkbox	Use this to Enable or Disable this Special Application as required.
Name	Enter a descriptive name to identify this Special Application.
Incoming	• Type - Select the protocol (TCP or UDP) used when you receive data
Ports	from the special application or service. (Note: Some applications use
	different protocols for outgoing and incoming data).
	• Start - Enter the beginning of the range of port numbers used by the
	application server, for data you receive. If the application uses a single
	port number, enter it in both the "Start" and "Finish" fields.
	• Finish - Enter the end of the range of port numbers used by the applica-
	tion server, for data you receive.
Outgoing	• Type - Select the protocol (TCP or UDP) used when you send data to
Ports	the remote system or service.
	• Start - Enter the beginning of the range of port numbers used by the
	application server, for data you send to it. If the application uses a sin-
	gle port number, enter it in both the "Start" and "Finish" fields.
	• Finish - Enter the end of the range of port numbers used by the applica-
	tion server, for data you send to it. If the application uses a single port
	number, enter it in both the "Start" and "Finish" fields.

Using a Special Application

•Configure the Special Applications screen as required.

•On your PC, use the application normally. Remember that only one (1) PC can use each Special application at any time. Also, when 1 PC is finished using a particular Special Ap- plication, there may need to be a "Time-out" before another PC can use the same Special Application. The "Time-out" period may be up to 3 minutes.

44