Windows NT 4.0 and Later 1-11

7Select Enable software compression.

8Specify an IP address by clicking TCP/IP settings.

If your ISP

Do this

 

 

Gives you a specific IP address

Click Specify an IP address and enter

 

the IP address provided by your ISP

 

 

Does not give you a specific IP address

Click Server assigned IP address

 

 

9After you specify an IP Address, specify server assigned name server addresses, if needed

:

If your ISP

Do this

 

 

Gives you specific name server

Click Specify name server addresses and

addresses

enter the server address(es) provided by your

 

ISP

 

 

Does not give you specific name

Click Server assigned server addresses

server addresses

 

 

 

Configuring a SLIP The following steps explain how to configure Windows NT for use with a connection SLIP connection.

1Double-clickDial-Up Networking.

2Click New

3Select the Server tab and select SLIP in the Dial-up server type box.

4Click TCP/IP settings.

5Enter the IP address provided by your ISP.

6Enter the primary DNS and secondary DNS server IP addresses in the appropriate name server address boxes.

7If your ISP requests that you use a specific frame size, select the desired frame size in the Frame Size box.

Page 25
Image 25
3Com 56K manual Select Enable software compression, Specify an IP address by clicking TCP/IP settings