3Com 56K manual To make the host Business Command Example Modem, For your modem to Command Example

Setting up Dial Security 10-3

Dialback options You can set the Business Modem to automatically dialback a certain number after a client modem dials in.

Count your commas! There should always be four commas in the %A command.Do not insert spaces between commas or between fields and commas. Spaces will invalidate the command.

To make the host Business	Command	Example
Modem
Hang up and then dial back a	AT%A0=password,y	AT%A0=corn,y,y,n,1,8
guest device at a specified	,y,n,1 area code	475555555
number.	and phone number
Expect a pause of
approximately 1.5 minutes
before the modem dials back.
You cannot alter the duration
of the pause.
Prompt you to enter a	AT%A0=password,y	AT%A0=corn,y,y,y,
number at which to dialback	,y,y,
a device, and then have the
Business Modem dialback the
device at that number
Disable dialback	AT%A0=password,y	AT%A0=corn,y,n,,
	,n,,

To enable Dialback, you must enable Dial Security with Prompting. See step 6.

2Identify your account as the Administrative Account

For your modem to	Command	Example
Identify your account as the	AT%L	AT%L=PW0
Administrative Account		This example sets account 0 as the
		Administrative Account.

Once you set the administrative password, you cannot view or modify the guest account profiles unless you enter the correct administrative password.

WARNING: Be sure to remember your administrative password. If you enable Dial Security and then forget your administrative password, you