3Com 56K manual AT%P0=password

9-2CHAPTER 9: ACCESSING AND CONFIGURING THE BUSINESS MODEM REMOTELY

2Enable remote access.

Set Register S41 for a value of 1 or greater. S41 sets the number of log-in attempts available to the remote user. A setting of zero allows no log-in attempts disabling remote access.

Example: Sending ATS41=1&W allows for 1 log-in attempt by a remote user.

3Set one or two remote-access passwords.

You can set two passwords to allow different levels of access to each Business Modem

	Use this command to assign a
To allow guest users to	remote-access password
View the Business Modem’s configuration.	AT%P0=password
View and change the Business Modem’s	AT%P1=password
configuration.

Example: Sending AT%P1= corn will allow a remote user to log-in with the password corn. The user can view and change the Business Modem’s configuration.

Remote-access passwords can be up to eight alphanumeric characters long, and are not case-sensitive