3Com 56K manual Accessing the Host

Accessing the Host 9-3

Other Remote-AccessThe table below is a list of remote-access configuration commands.

Commands

For your modem to	Command
Display a view-only password	AT%P0?
Display a view-and-change password	AT%P1?
Erase a view-only password	AT%P0=
Erase a view-and-change password	AT%P1=
Disable remote access entirely	ATS41=0

Example: Sending AT%P1= will erase the view and change password.

WARNING: If you erase the%P1 password without disabling remote access (using ATS41=0), anyone could access the Business Modem and change its configuration.

Accessing the Host

At the Guest Device The guest device requires no configuration to access the host. Follow these steps:

1Be sure that the host device has enabled remote access and is set to auto-answer (ATS0=1). Know the password, if you will need one.

2Call the host device (although it doesn’t matter which device originates the call).

3After a connection is established, do this: a Pause 4 seconds.

b Type 4 tildes: ~~~~

c Pause 4 seconds.

The administrator of the host device can change the remote-access character using S-Register 42, and the pause duration using S-Register 43. See Appendix A, S-Registersfor more information.