Barco 26-0702000-00 4Universal Input, 5Universal Input, FSN-1400Orientation, 2Card Power LED

2. FSN-1400 Orientation

Card Descriptions

2)Card Power LED

The Card Power LED indicates power status for the card. Refer to the “Card LEDs” section on page 64 for details.

3)Loaded LED

The Loaded LED indicates the status of all FPGAs on the card. Refer to the “Card LEDs” section on page 64 for details.

4)Universal Input 1

Three connectors are provided for Universal Input 1 (1 x HD15, 1 x DVI-I, 1 x BNC). Using these connectors, different combinations of inputs can be connected to the FSN-1400, as outlined below, but only one of the three connectors can be used at a time on the control panel.

Cells with check marks denote the connections required for the indicated format.

Table 2-6.UIC connector combinations for selected universal input formats

Connectors

Format BNC DVI-I HD-15

HD-SDI

SD-SDI

DVI *

CVBS

Y/C

YPbPr **

RGsB

RGBS

RGBHV ***

*up to 165 MHz

**NTSC, PAL or HD

***up to 165 MHz (UXGA)

Please note the following important points regarding the UIC:

~Refer to the “Analog Format Connection Table” section on page 65 for additional information on using the HD-15 connector.

5)Universal Input 2

Input connections for Universal Input 2 are identical to Universal Input 1. Refer to the explanation of Universal Input 1 for details.

Note

In Appendix A, refer to the “Delay Specifications” section on page 438 for details on UIC delay.

56 FSN Series • User’s Guide • Rev 01