Barco 26-0702000-00 manual fåéìí=póåÅ=pÉÅíáçå, råÇÉêëí~åÇáåÖ=póåÅ=jçÇÉ, Menu Orientation

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 211
Image 211
fåéìí=póåÅ=pÉÅíáçå

Sync

Mode

Auto

Refresh

Sync

5. Menu Orientation

System Menu

fåéìí=póåÅ=pÉÅíáçå

The figure below illustrates the Input Sync Section for native inputs:

Sync

Sync

 

Refresh

Mode

 

 

Sync

Auto

 

 

 

 

 

 

Figure 5-89.Input Sync Section, Native Inputs

Press {Sync Mode} to display the Sync Mode Pop-up, which enables you to set the selected native input’s sync mode. Refer to the “Understanding Sync Mode” section below for details.

When the selected native input’s sync mode is set to Auto and the system switches to Auto: Frame Sync, the system stays in that mode until the sync detection is manually refreshed. Press {Refresh Sync} to refresh the sync detection process for the selected native input.

This procedure enables the Auto mode to switch back to Minimum Delay mode

provided that the signal is within range. Please note:

~The button only appears when the selected input is set to Auto mode.

~In Auto: Minimum Delay mode, the button is grayed out.

~In Auto: Frame Sync mode, the button is active.

råÇÉêëí~åÇáåÖ=póåÅ=jçÇÉ

The {Sync Mode} button enables you to set the selected native input’s sync mode, for both native inputs (on NICs) and the two native external DSK inputs. The button is only enabled under certain configurations:

When the reference video input is set to {External} and {Output V-Lock}is On (on the Reference and Output Setup Menu), all native inputs are forced to Frame Sync mode and the {Sync Mode} button is grayed out. The button’s insert reads “Frame Sync.”

When the reference video input is set to {External} and {Output V-Lock}is Off, the {Sync Mode} button is enabled.

Refer to the “Reference and Output Setup Menu” section on page 197 for more information on the Reference and Output Setup Menu.

The following three options are available in Sync Mode Pop-up:

Auto — In this mode, the system automatically selects either Frame Sync or Minimum Delay mode, based on the input signal’s relationship to the external reference video signal.

~If the input is equal to or less than ± one-half line from video reference, Minimum Delay mode is automatically selected. The Sync Mode column in the table displays Auto: Minimum Delay.

FSN Series • User’s Guide • Rev 01

 

211

 

Page 211
Image 211
Barco 26-0702000-00 manual fåéìí=póåÅ=pÉÅíáçå, råÇÉêëí~åÇáåÖ=póåÅ=jçÇÉ, Menu Orientation, FSN Series • User’s Guide • Rev