pï~é=hÉó=pÉííáåÖë

Swap

Key

Settings

5. Menu Orientation

Keyer Menu

pï~é=hÉó=pÉííáåÖë

The {Swap Key Settings} button swaps the settings between KEY 1 and KEY 2. The function is not available for the DSK.

Please note:

KEY 2 is always “over” KEY 1 in the M/E — visually on top of, and electronically downstream of KEY 1, as shown below.

Figure 5-47.Key Settings, KEY 2 over KEY 1

When {Swap Key Settings} is pressed, the settings of the two keyers are swapped. The key source that was previously in KEY 2 moves to KEY 1, and now appears “under” the other key source.

Figure 5-48.Key Settings swapped

Press {Swap Key Settings} again to swap the settings back.

Important

If a DVE channel is assigned to either keyer, a pop-up will

 

appear, alerting you that DVE channel assignments will be

 

changed if you proceed. For example, if DVE channel 1 is

 

assigned to Keyer 1, it will be assigned to Keyer 2 after the

 

“swap” is performed.

 

 

FSN Series • User’s Guide • Rev 01

 

165

 

Page 165
Image 165
Barco 26-0702000-00 manual pï~é=hÉó=pÉííáåÖë, Menu Orientation, FSN Series • User’s Guide • Rev