aáëéä~ó=pÉÅíáçå

1)Touch Screen 1

3. Control Panel Orientation

Control Panel Descriptions

aáëéä~ó=pÉÅíáçå

The figure below illustrates the Display Section:

2)KnobsManual background 2

Figure 3-4.Display Section (with sample menu)

1)Touch Screen

2)Knobs

The Display Section provides the controls for adjusting system parameters. The display itself can be mounted in a variety of ways. In Chapter 4, refer to the “Display Mount Options” section on page 109 for details.

Following are descriptions of each section:

1)Touch Screen

The high-resolution Touch Screen is a multi-menu user interface that enables you to set up the switcher, adjust parameters, view status, and manage all functions. Refer to Chapter 5, Menu Orientation” on page 131 for details.

2)Knobs

Four Knobs are provided to the right of the Touch Screen. When one or more “value buttons” appear on the Touch Screen, or when a line is drawn to a table, the adjacent knob(s) enable you to adjust those specific parameters.

Please note:

~Turning a knob to the right (clockwise) increases a parameter’s value, or in a table, scrolls the highlight down. Turning a knob to the left (counter- clockwise) decreases a value, or scrolls the highlight up.

~If you adjust a numeric value using a Knob, you do not need to press Enter. Using this method, the new value is immediately active.

~If you enter a numeric value using the “on-screen” Keypad or the control panel’s Keypad, the Enter button must be pressed.

FSN Series • User’s Guide • Rev 01

 

73

 

Page 73
Image 73
Barco 26-0702000-00 aáëéä~ó=pÉÅíáçå, 1Touch Screen, 2Knobs, Control Panel Orientation, FSN Series • User’s Guide • Rev