Barco 26-0702000-00 fåéìí=q~ÄäÉ=aÉëÅêáéíáçå, Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

fåéìí=q~ÄäÉ=aÉëÅêáéíáçå

The figure below illustrates a sample Input Table on the Input Menu:

Slot	In	Map	Name	Format
1	1	1	CAM1	Native
1	2	2	CAM2	Native
1	3	3	CAM3	Native
1	4
1	5
1	6

Figure 5-84.Input Table (sample)

The Input Table provides information about each input, and the yellow highlight automatically tracks the selected input connector in the Rear I/O View.

The following columns of information are provided:

•Slot — indicates the selected input card slot (1 through 7).

•In — indicates the selected input (1 through 8 for a NIC, 1 or 2 for a UIC).

•Map — indicates the control panel button to which the input is mapped, as defined with the {Map to} button. Unshifted locations are 1 through 10. Shifted locations are 11 through 20.

~If the cell is blank, the input is not mapped to the panel.

~If a “+” appears after the map location (e.g, 2+), the input is mapped to more than one location on the panel.

•Name — indicates the input’s name, as defined with the {Input Name} button.

•Format — displays the following information:

~When the associated connector is green, the format is shown:

•For a NIC, “Native” is shown.

•For a UIC, the input’s resolution is shown (e.g., 1920 x 1080i @ 59.94).

~When the associated connector is red, the label “Error” is shown.

~When the associated connector is yellow, the cell is blank.

~When the associated connector is white, the cell is blank.

FSN Series • User’s Guide • Rev 01 205